Recommended Products

BMW E36 M50/M52 MS41.1 and MS41.3 datalogging guide covering RomRaider setup, COM port settings, tuning parameters, MAF logging and extended MS41.3 data.

BMW E36 M50/M52 MS41.1 and MS41.3 MAF tuning guide covering MAF Tuner setup, datalogging, correction tables, 1024/2048 kg/hr modes, and Nissan/Hitachi MAF calibration.

BMW E36 M50/M52 MS41.1 and MS41.3 wiring reference with factory ECU pins, wire colors, Nissan/Hitachi MAF wiring, sensors, boost control and tuning inputs.

Download and set up the software and definition files needed for BMW MS41/MS41.3 tuning, including RomRaider, QuickFlash, ECU definitions, logger definitions, and supporting files.

Before changing fuel maps, ignition timing, injector scaling, or any other calibration parameter, you need a reliable way to communicate with the ECU. A basic MS41 tuning setup consists of a Windows computer, compatible USB-to-OBD interface, tuning software, MS41 definition files, flashing software, and a stable electrical system. OpenMS41 lists four basic requirements for reflashing an MS41 ECU: MS41 QuickFlash ECU cable RomRaider Write access enabled This section will get t

BMW MS41.3 Tuning Guide Start Here BMW's Siemens MS41 platform is a capable factory engine-management system for modified BMW six-cylinder applications. Through the research and development documented by the OpenMS41 project, MS41 can be read, flashed, logged, and calibrated using software such as RomRaider and MS41 QuickFlash. OpenMS41 primarily documents: • MS41.0• MS41.1• MS41.2 Much of the original tuning and reverse-engineering work was centered around MS41.2. The FergZ

How to tune VANOS : 1. log Load and RPM with VANOS always disabled in RR. do a WOT run to rev limiter 2. log Load and RPM with VANOS always enabled in RR. do a WOT run to rev limiter 3. create XY Line Charts and note the RPM at which the curves intersect at high RPM 4. set VANOS to turn off at this RPM in the final tune In the graph below these two curves intersect at ~ 6000RPM. That is the ideal point to turn off VANOS for this engine.